Intel Ethernet Network Adapter E810-XXVDA4T - Network adapter - PCIe 4.0 x16 low profile - 10/25 Gigabit SFP28 x 4

• Description
• Specifications

• Increasing growth in 5G RAN and edge deployments is driving demand for high-precision timing synchronization across the network. Meet these challenging requirements head-on with a standards-based PCIe adapter that provides greater flexibility at a lower price point than single-purpose timing appliances. Most 5G RAN deployments use 1588 PTP, SyncE, or both to ensure required timing synchronization. Both of these synchronization methods are supported by the E810-XXVDA4T, while additional hardware enhancements ensure reliability and accuracy, and provide greater flexibility and simplicity for timing synchronization deployments. Synchronous Ethernet (SyncE) delivers frequency synchronization over Ethernet between SyncE-enabled devices. Extends traditional telecom timing architecture to commercial-off-the-shelf (COTS) Ethernet solutions. IEEE 1588 PTP enables synchronization of systems on a network through the transfer of timing data (including frequency, phase, and time of day) with hardware timestamping in PTP packets. Onboard high-precision oscillator maintains high accuracy during holdover, providing up to four hours with less than +/- 1.5 microsecond of phase error. GNSS mezzanine enables integrated support for frequency, phase, and time-of-day synchronization with Global Navigation Satellite Systems, including GPS, Galileo, GLONASS, BeiDou, and QZSS. Subminiature version B (SMB) coaxial connector allows connection to an external active GNSS antenna. Dual external SubMiniature version A (SMA) coaxial connectors allow connection to external 1PPS timing sources, such as GNSS signaling, devices and to timing recipients, enabling the network adapter to act as a grandmaster and as a timing source for other equipment. The output capability provides a way to audit the phase accuracy of each node. U.FL connectors, embedded coaxial connectors, allow 1PPS signal connectivity between the adapter and motherboard or another adapter. Dedicated send-and-receive U.FL ports are embedded on the adapter. Flexible Configurations. Intel Ethernet Optics, and specification-compliant Active Optical Cables and Direct Attach Cables, can support multiple configurations.

• Product Description	Intel Ethernet Network Adapter E810-XXVDA4T - network adapter - PCIe 4.0 x16 - 10/25 Gigabit SFP28 x 4
  Form Factor	Plug-in card - low profile
  Manufacturer Warranty	Limited lifetime warranty
  Dimensions (WxDxH)	167 mm x 111 mm
  Device Type	Network adapter
  Data Link Protocol	1GbE, 10GbE, 25GbE
  Network / Transport Protocol	iSCSI, NFS, iWARP
  Interface (Bus) Type	PCI Express 4.0 x16
  PCI Specification Revision	PCIe 4.0
  Ports	10/25 Gigabit SFP28 x 4

Alternatives available now

Sonicwall — 02-SSC-6819

SonicWall TZ370 - Advanced Edition - security appliance - with 1 year TotalSecure - 1GbE - desktop

1.390,29 € incl. VAT

1.149,00 € excl. VAT

In stock

Add

Belkin — F1DN204KVM-UNN4

Belkin Universal Secure Dual-Head - 2nd Generation - KVM / audio switch - 4 x KVM / audio - 1 local user - desktop - TAA Compliant

1.435,82 € incl. VAT

1.186,50 € excl. VAT

In stock

Add

Qnap — TS-H765EU-8G

QNAP TS-H765EU - NAS server - 4 bays - rack-mountable - SATA 6Gb/s - RAM 8 GB - 2.5 Gigabit Ethernet - 1U

1.274,59 € incl. VAT

1.053,26 € excl. VAT

In stock

Add

Netgear — GSM4210PX-100EUS

NETGEAR AV Line M4250-8G2XF-PoE+ - Switch - L3 - Managed - 8 x 10/100/1000 (8 PoE+) + 2 x 10 Gigabit SFP+ - side to side airflow - desktop - PoE+ (220 W)

1.257,89 € incl. VAT

1.039,37 € excl. VAT

In stock

Add